Reduced Emissions
The E500/E700 monitor incorporates Reduced Magnetic Field technology
designed to reduce magnetic and alternating electric field emissions and static
electricity. NEC’s monitors follow the strictest magnetic field, alternating
electric field, and electrostatic recommendations of the Swedish Board for
Technical Accreditation, or SWEDAC (previously known as MPR, National
Board for Measurement and Testing). The JC-1575VMB/R,
JC-1746UMB/R follows the recommendations of the TCO which specify
maximum recommended values of electric and magnetic fields.
Multiple Frequency Technology
Multiple Frequency Technology automatically adjusts the monitor to the
video card’s scanning frequency, displaying the resolution you desire.
The MultiSync E
500/E700 color monitor also supports multiple operating
platforms such as PC compatible, Macintosh family and workstation
systems.
Increased refresh rates at all resolutions provide a flicker-free image.
The clearer image is easier on your eyes and extends your viewing time.
A wide range of graphics standards of PC and Macintosh computers,
including VESA standards, is supported by the MultiSync E
500/E700
color monitor including:
– 640 x 480: 60 - 120 Hz
– 800 x 600: 55 - 105 Hz (E500) / 120 Hz (E700)
– 832 x 624: 55 - 100 Hz (E500) / 120 Hz (E700)
– 1024 x 768: 55 - 85 Hz (E500) / 100 Hz (E700)
(non-interlaced, 85 Hz recommended)*
– 1152 x 870: 55 - 75 Hz (E500) / 90 Hz (E700)
–
1280 x 1024: 55 - 65 Hz (E
500
) / 75 Hz (E
700
)
(non-interlaced)**
* NEC cites recommended resolutions for optimal display performance.
** Maximum resolution based on horizontal and vertical frequencies only.
NOTE: Some system may not support all modes listed.
E - 4 Introduction
To Next Page
Loading...
Need help?
General