35
3
3. Basic Operation of Desktop Control Utility 1.0
Basic Operation of Desktop Control Utility 1.0
<1>
<2>
<3>
<4>
<1> (cut-off icon) ............. Disconnects communication with the personal computer.
<2> (Shift icon) ............... When the highlight is moved to this icon and the button
is pressed, shift lock status is set. The shift lock is canceled if
the highlight is moved to this icon and the button is
pressed again.
<3>
(Ctrl icon) ................. When the highlight is moved to this icon and the button
is pressed, control lock status is set. The control lock is canceled
if the highlight is moved to this icon and the
button is
pressed again.
<4>
(ESC icon) ............... The same operation as when the [ESC] key of the personal
computer is pressed is performed. This icon is used, for
example, to stop a slideshow of PowerPoint.
■ Operating the projector (disconnecting communications)
1
Press the
button while the desktop screen is displayed.
An auxiliary operation bar will be displayed at the lower left of the screen.
2
Move the highlight to (cut-off icon) and press the button.
Communication will be disconnected and a connection bar will be displayed at the lower left of the
screen.
To resume communication, click (PC search icon).
After that, follow steps
12
and
13
on the preceding page.
Reference
Communication can also be disconnected by clicking the projector icon on the taskbar
and then clicking "Disconnect" while the desktop screen is displayed.
To Next Page
Loading...
