30
3. Basic Operation of Desktop Control Utility 1.0
3. Basic Operation of Desktop Control Utility 1.0
For the major functions of the Desktop Control Utility 1.0, refer to "1-1. What You Can Do with
User Supportware 3" (
page 7).
3-1. Manipulating Desktop Screen by Using Projector
■ Operation on personal computer
1
Click Windows [Start] → [All Programs] → [NEC Projector User Supportware]
→ [Desktop Control Utility 1.0] → [Desktop Control], in that order.
The "Startup password settings" window will be displayed.
Screen when Desktop Control Utility
1.0 is started first time already
Screen if starting password has
been set
Important
• Be sure to write down the starting password in case you forget it.
• The starting password must be input each time Desktop Control Utility 1.0 is started.
• Should you forget the starting password, reinstall the Desktop Control Utility 1.0.
A screen like the one below is displayed when the software is started on a PC installed with
Windows XP Service Pack 2 (SP2).
Click “Unblock” if this is displayed.
To Next Page
Loading...
