What to do if the power button does not respond on NEC MultiSync P403?
If the power button on your NEC monitor isn't responding, try these steps: * Unplug the power cord of the monitor from the AC outlet to turn off and reset the monitor. * Check the main Power Switch on the back side of the monitor to ensure it is in the ON position.
How to fix no picture on my NEC Monitor?
If there is no picture on your NEC monitor, ensure the following: * The signal cable is completely connected to the display card/computer. * The display card is completely seated in its slot. * The main Power Switch is in the ON position. * The Front Power Switch and computer power switch are in the ON position. * A supported mode has been selected on the display card or system. * The monitor and display card are compatible with recommended settings. * The signal cable connector has no bent or pushed-in pins. * If the monitor went into OFF mode after signal loss, press the power button.
Why is RS-232C or LAN control not available on my NEC MultiSync P403?
If RS-232C or LAN control is not available on your NEC monitor, check the RS-232C or LAN cable connection.
Why is the component signal image greenish on my NEC monitor?
If the image of a component signal is greenish on your NEC monitor, check to see if the Y/Pb/Pr input connector is selected.
What to do if the resolution on my NEC MultiSync P403 is not displayed properly?
If the selected resolution is not displayed properly on your NEC monitor, use the OSD Display Mode to enter the Information menu and confirm that the appropriate resolution has been selected. If not, select the corresponding option.
How to fix snowy picture and poor sound in TV mode on NEC MultiSync P403 Monitor?
If you are experiencing a snowy picture and poor sound in TV mode on your NEC monitor, check the antenna/cable connection. Use a new cable if necessary.
Why is the schedule or off timer function not working on my NEC MultiSync P403?
If the “SCHEDULE”/“OFF TIMER” function is not working properly on your NEC monitor, note that the “SCHEDULE” function will be disabled when the “OFF TIMER” is set.
How to fix image persistence on NEC MultiSync P403 Monitor?
To alleviate image persistence on your NEC monitor, turn off the monitor for as long as the previous image was displayed.
How to resolve snowy picture in DVI input on NEC monitor?
If you are experiencing a snowy picture or black screen with DVI input on your NEC monitor, check the DVI MODE setting when a DVD player or computer equipment is connected to the DVI input.
How do I fix the display image size on my NEC MultiSync P403?
If the display image on your NEC monitor is not sized properly, use the OSD Image Adjust controls to increase or decrease the coarse adjustment. Also, check to make sure that a supported mode has been selected on the display card or system being used.
General| Panel life | - h |
|---|---|
| Panel type | SPVA |
| Pixel pitch | - mm |
| Response time | 8 ms |
| Display diagonal | 40 \ |
| Display brightness | 700 cd/m² |
| Display technology | LED |
| Native aspect ratio | 16:9 |
| Vertical scan range | 50 - 85 Hz |
| Horizontal scan range | 31.5 - 91.1 kHz |
| LED backlighting type | Edge-LED |
| Contrast ratio (typical) | 4000:1 |
| Display number of colors | - |
| Display diagonal (metric) | 101.6 cm |
| Active display area (W x H) | 885.6 x 498.15 mm |
| Supported graphics resolutions | 640 x 480 (VGA), 800 x 600 (SVGA), 1024 x 768 (XGA), 1280 x 1024 (SXGA), 1280 x 768 (WXGA), 1360 x 768 (WXGA), 1600 x 1200 (UXGA), 1920 x 1080 (HD 1080), 3840 x 2160, 4096 x 2160 |
| Ethernet LAN (RJ-45) ports | 2 |
| Product color | Black |
| Product design | Digital signage flat panel |
| Bezel width (bottom) | 15.5 mm |
| Panel mounting interface | 300 x 300 mm |
| Compatible products | C-tick; CE; FCC Class B; PSB; TÜV GS; UL/C-UL or CSA; VCCI |
| Operating hours (hours/days) | 24/7 |
| Sustainability certificates | RoHS |
| RMS rated power | 20 W |
| Power consumption (standby) | 1 W |
| Power consumption (typical) | 135 W |
| Operating temperature (T-T) | 0 - 40 °C |
| Operating relative humidity (H-H) | 20 - 80 % |
| Cables included | AC, DVI |
| Certification | C-tick; CE; FCC;' PSB; RoHS; TÜV GS; UL/C-UL CSA; VCCI |
Weight and Dimensions| Depth | 66.5 mm |
|---|---|
| Width | 920.6 mm |
| Height | 532.2 mm |
| Weight | 17000 g |
Critical safety alerts and precautions for monitor usage.
Instructions for selecting and using the correct power cord.
Rules for safe operation, handling liquids, and ventilation.
Tips for optimal performance, eye comfort, and cleaning procedures.
Guidelines for selecting a suitable installation site and ensuring stability.
How to attach mounting hardware and prevent the monitor from falling.
Steps for setting up the monitor, installing batteries, and connecting power.
To Next Page
