Chapter 8 System Administration
NEAX 2000 IPS
Request for Proposal (RFP) Reference Guide Page 8- 5
NDA-24349, Issue 4
MATWorX PC Requirements
MATWorX requires an IBM or compatible PC running Microsoft Windows
®
98, ME, 2000 or XP.
Minimum Requirements Recommended
Pentium III 350 MHz processor Pentium IV 1 GHz processor
128 MB RAM 256 MB RAM
Available hard-disk space
before installation:
200 MB - Full Installation
MATWorX uses about 100 MB
Available hard-disk space
before installation:
200 MB - Minimum installation
MATWorX uses about 100 MB
SVGA monitor, 800 x 600
resolution
15” SVGA monitor, 1024 x
768 resolution
3.5” diskette drive, CD-ROM drive
Valid NEAX hardware connection
(direct serial, modem, or TCP/IP)
Mouse
System Diagnostics
When a fault occurs in the system, an audible and visual indication will be given at the
following units:
External alarm indicating unit
Fault messages reported at MATWorX for remote reporting
Alarm lamps in front of each package mounted in the frame
Self Diagnostic/System Messages
The NEAX 2000 IPS provides a sophisticated array of self-diagnostic routines that are
continually and automatically being performed. Various system messages are printed when a
fault occurs in a central processor system, switch network processors. Many other
miscellaneous system messages and change of key status messages are also printed.
To Next Page
Loading...
