NEC NEAX 2000 IPS - Analog Terminals

Chapter 5 Station Equipment
Page 5- 16 NEAX2000 IPS Request For Proposal (RFP) Reference Guide
NDA-24349 Issue 4
 ITR-320C-1 (5.1” color LCD and 32 programmable keys)

ITR-320G-1 (5.1” gray scale LCD and 32 programmable keys)
Wireless Handset
 D
term
PSIII
D
term
IP Soft Phones
 D
term
SP20
 D
term
SP30
D
term
Extenders
 D
term
Extender (ISDN)
 D
term
Extender (Analog)
Analog Terminals
NEC offers two distinct analog terminals. Both are available in black or white.
Descriptions of the Analog Terminals
Description Remarks
DTR-1-1 (WH) TEL
DTR-1-1 (BK) TEL
Fully modular with Redial key, Flash key, Message Waiting lamp, Data Jack
and Ring/Handset Receive Volume.
DTR-1HM-1 (WH) TEL
DTR-1HM-1 (BK) TEL
Fully modular with Redial key, 'Flash' key, Message Waiting Lamp, Data Jack,
eight programmable Feature/Speed Dial keys and Ring/Handset Receive
Volume.
Line Conditions of the Analog Terminals
Terminal Type Card Type Cable Length* (Cable 0.5/24 AWG)
PN-4LCD-A (max. 600 ohms loop resistance) Approximately: 1.43km (.88 miles)
PN-8LCAA (max. 600 ohms loop resistance) Approximately: 1.43km (.88 miles)
PN-AUCA (max. 2500 ohms loop resistance) Approximately 12.29km (7.63 miles)
DTR-1-1
DTR-1HM-1
PN-4LLCB (max. 2500 ohms loop resistance) Approximately 12.29km (7.63 miles)
*Cable length is based on the diameter of the cable and the terminal impedance.