Chapter 9 Descriptions
NEAX 2000 IPS
Request for Proposal (RFP) Reference Guide Page 9- 39
NDA-24349, Issue 4
Multiple Call Forwarding - All Calls - CCIS
This feature allows the last hop of a Multiple
Call Forwarding - All Calls sequence to be
forwarded over a CCIS network to a station in
another office.
Multiple Call Forwarding - Busy Line – CCIS
This feature allows the last hop of a Multiple
Call Forwarding - Busy Line sequence to be
forwarded over a CCIS network to a station in
another office.
Multiple Call Forwarding - Don’t Answer - CCIS
This feature allows the last hop of a Multiple
Call Forwarding - Don’t Answer sequence to
be forwarded over a CCIS network to a station
in another office.
Multiple Console Operation – CCIS
This feature provides console operation where
Attendant Consoles are installed in more than
one node in the CCIS network.
Network Station Number - CCIS (FCCS)
When 2000 IPS is connected to a 2400 IPX
via CCIS link, the Network Station Number
can be moved to other office within the
network by a simple command operation from
the Centralized MAT in the 2400 IPX.
Night Connection - Fixed – CCIS
This feature routes calls normally directed to
the Attendant Console to a pre-selected
station in another office, through the CCIS
network, when the Night mode has been
entered.
Night Connection - Flexible – CCIS
This feature provides an inter-office night
connection service, via the CCIS network,
when the calling station and the night station
belong to different offices.
Outgoing Trunk Queuing - CCIS
This feature allows a CCIS network station,
upon encountering an all trunk busy signal, to
dial a specified access code and enter a first-
in, first-out queue. As soon as a CCIS trunk
becomes available, stations in the queue will
be called back on a first-come, first-served
basis.
Paging Access - CCIS
This feature provides dial access to paging
equipment from an Attendant Console or a
station, through the CCIS network.
Restriction from Outgoing Calls - CCIS
This feature automatically restricts users of
pre-selected stations from placing outgoing
calls and/or certain miscellaneous trunk calls
through CCIS, without Attendant assistance.
Service Display - CCIS
This feature generates LCD displays on the
Multiline Terminal corresponding to the
various features as they are initiated.
Single-Digit Station Calling - CCIS
This feature allows the assignment of Single-
Digit Station numbers.
Station-Controlled Conference - CCIS
This feature allows any station of the 2400
IPX to establish a conference among a
maximum of eight parties of stations and/or
trunks (inside and outside parties) of the 2000
IPS, through CCIS.
To Next Page
Loading...
