Chapter 1 Introduction
NEAX2000 IPS Request For Proposal (RFP) Reference Guide Page 1-21
NDA-24349, Issue 4
IPS System Capacity (Single MP System cont’d)
Capacity Per PIM Note 1
Item
PIM1 PIM2 PIM3 PIM4 PIM5 PIM6 PIM7 PIM8
Attendant Terminal (D
term
ATT Position) Max. 8 sets per system
SMDR Interface Max. 1 interface port per system
PMS Interface Max. 1 interface port per system
ACD / MIS or OAI Interface Max. 1 interface port per system
Remote PIM over IP (Number of PIM at Remote
Site)
Up to 15 (depending on network)
DID Dial Conversion 1000
Call Forwarding-Outside Set 496
Authorization. Code / Forced Account Code /
Remote Access to System(DISA)Code
3000
Message Reminder Set 1024
Name Display / Guest Name Display 512
Speed Calling-Station (Station Speed Dial) Set 10000
MP built-in SMDR Call Record 1280
Note: System Capacity is for Main site only. For Total System Capacity see IP Remote Network System Capacity.
To Next Page
Loading...
