NEC NEAX 2000 IPS - Page 354

Chapter 16 Wireless System
Page 16-16 NEAX2000 IPS Request for Proposal (RFP) Reference Guide
NDA-24349, Issue 4
Zone Transceiver II Specifications
ITEM SPECIFICATIONS
ZT II S
Output Power 6.8 mW
Type of Interface S Interface
Number of Simultaneous Speech Path Maximum 3
Power Supply • PBX Power Supply (DC –48 V)
• Local Power Supply (AC 100 V/200 V)
Power Consumption Maximum 4 W
Operating Conditions Ambient Temperature: –10 50 °C
Relative Humidity : 45 85 % (non condensing)
Installation Location : Indoor
Dimensions (unit: mm) 160 (W) x139 (D) x40 (H) (Excluding Antenna)
Weight Approx. 400 g
ZT II U
Output Power 6.8 mW
Type of Interface U Interface
Number of Simultaneous Speech Path Maximum 3
Power Supply • PBX Power Supply (DC –48 V)
• Local Power Supply (AC 100 V/200 V)
Power Consumption Maximum 3 W
Operating Conditions Ambient Temperature: –10 50 °C
Relative Humidity : 45 - 85 % (non-condensing)
Installation Location : Indoor
Dimensions (unit: mm) 160 (W) x139 (D) x40 (H) (Excluding Antenna)
Weight Approx. 400 g
System Capacity
Note: All existing CSH cards in a system should be SPN-SC03B 8CSH-C (AP) when accommodating
257 or more PSs.