Chapter 19 Voice Messaging Systems
NEAX 2000 IPS Request for Proposal (RFP) Reference Guide Page 19- 13
NDA-24349, Issue 4
Required Equipment for NEAXMail AD-8
Description Function
PZ-VM00 The PN-VM00 card consists of a digital signal processor for
port interface (4 ports), central processor unit for controlling
various data, hard disk unit to read/write the voice mail
application program and voice mail information, and
provides an internal modem (14.4 kbps) for remote
maintenance. This card provides 8 ports
PN-VM01 Additional 4 Ports - Plugs into connector on PN-VM00 card.
This card is used for expanding the port interface up to 8
ports.
PN-AP00-B This card continually supervises the status of the
NEAXMail AD-8 on MCI connection, and stores the call
information into its memory if the NEAXMail AD-8 is not
ready. This card stores information for a maximum of 16
calls.
AP VM-0.7 CA-A MCI Cable from AD8 to AP00
RS RVS-4S CA-C May be used to directly connect PC to AD8
LC, COT card For remote maintenance using internal modem on the
VM00 card, an LC-COT connection is required on the PBX.
MAT CA-T Used to connect a Maintenance Console to the NEAXMail
AD-8 directly
NEAXMail AD-8 System Manual This manual explains the installation procedure and
programming procedure for the NEAXMail AD-8.
NEAXMail AD-8 Reference Manual This Reference Manual has a format that lets you quickly
find the information you need for a particular system task.
NEAXMail AD-8 Console
Maintenance Guide
This guide is used for Console Maintenance. Console
Maintenance lets you solve problems on the voice mail
system without visiting a customer site.
NEAXMail AD-8 Easy Made
Application Manual
Use this manual to set up the NEAXMail AD-8 voice mail
system for a particular application quickly and easily.
Available AD-8 Language Sets
US English (US)
Argentine Spanish (AR)
Australian English (AU)
Global Spanish (ES)
French (FR)
Mandarin Chinese (MA)
Portuguese (PT)
Thai (TA)
UK English (UK)
To Next Page
Loading...
