Chapter 4 Equipment List
NEAX2000 IPS
Request For Proposal (RFP) Reference Guide Page 5-13
NDA-24349 Issue 4
Line/Trunk (LT) Cards (Cont.)
Function Name Port Remarks
SPN-2CSIA
8
2-line Zone Transceiver Interface Card:
• Used to interface with the ZT, based on
ISDN S-Interface.
• A maximum of two ZTs can be
connected per CSI card.
• Occupies eight time slots per one card.
The PZ-PW122 is required.
SPN-4CSIA
4
4-circuit CS interface for U-interface ZT.
Two slot card, 16 LT ports. The PZ-PW22 is
required.
Wireless Zone
Transceiver
interface
SPN-2CSIH
8
2-line Cell Station (Zone Transceiver) Interface
Card:
• Used to interface with the CS (ZT),
based on U-Interface.
• A maximum of two CSs (ZTs) can be
connected per CSI card.
• Occupies eight time slots per one card.
PZ-PW122 is required.
Fiber Optical
PN-M10 0
Optical Fiber Interface Card:
Provides optical fiber interface for T1/E1 Digital
Trunk Interface (1.5 M/2 Mbps) or Remote PIM.
Line length: 10 km (6.2 miles) or less. Line
coding: CMI.
PN-RTA 0
In-Skin Router Card
10/100BASE-TX:1, 10BASE-T:1, RS2332C(D-
sub 9pin)
Maximum 8 cards per PIM
PZ-M649 0
T1 Digital Trunk Interface (1.5Mbps) Card
Mounted on PN-RTA Card
Provides a built-in CSU.
In-Skin Router
PZ-M623 0
Ether Control Card
Mounted on PN-RTA Card
10BASE-T:1
To Next Page
Loading...
