Chapter 5 Station Equipment
NEAX2000 IPS
Request For Proposal (RFP) Reference Guide Page 5-21
NDA-24349 Issue 4
Terminal Options
Item Description
WM-R Unit Series i Multi-line Terminals with an AP(R)-R, AP(A)-R, CT(A)-R, and/or an IP-R
Unit can be wall mounted using the WM-R Unit.
AD(A)-R Unit Provides Series i Multi-line Terminals ability to interface with recording device.
AP( R)-R Unit Provides Series i Multi-line Terminals ability to interface with analog device such
as a cordless telephone, facsimile machine, external speakerphone, Automatic
Dialer or modem. Provides ringing to analog device connected. Requires an AC-
R ADP.
AP(A)-R Unit Provides Series i Multi-line Terminals ability to interface with analog device such
as a cordless telephone, facsimile machine, external speakerphone, Automatic
Dialer or modem. No ringing is provided.
CT(A)-R Unit Connects a Series i Multi-line Terminal to a PC providing a complete turnkey
package with graphical telephone user interface and call logging. Shipped with
Multi-line Phone Kits software. Supports Serial interface.
IP-R Unit A compact plug-and-play device that installs into the base of a D
term
Series i
display terminal. Integrated two-port 10/100baseT Ethernet pass through hub
that permits using one port to connect the network interface card (NIC) from the
PC to the IP network. The other is plugged directly into a LAN or an IP network
device such as a router, DSL modem or cable modem. Requires an AC-R ADP.
AC-R Unit AC adapter for DSS/BLF Console, AP(A), AP(R), or IP-R Unit
Line Conditions
Cable Length Note 1 Standard with AC Adapter
8DLC 300m (984ft)
Note 2
4DLC 300m (984ft) 1200m (3937ft)
D
term
8 / 8D
D
term
16/16D
2DLC 850m (2789ft) 1200m (3937ft)
8DLC 200m (656ft)
Note 2
4DLC 200m (656ft) 1200m (3937ft)
D
term
32/32D
2DLC 850m (2789ft) 1200m (3937ft)
8DLC - 300m (984ft)
4DLC - 1200m (3937ft)
D
term
Series i
DSS/BLF
Console
Note 3
2DLC - 1200m (3937ft)
Note 1: Cable length is based on the following conditions.
• Diameter of the cable is 0.5 mm.
• The Protection arrester is not inserted between the terminal and PBX.
Note 2: When using 8DLC card, it is not available for long line function, even if it is equipped with AC Adapter.
Note 3:
The DSS/BLF Console requires local AC/DC supply.
To Next Page
Loading...
