NEC NEAX 7400 ICS M100MX - Direct Outward Dialling (Dod)

DIRECT OUTWARD DIALLING (DOD)
– 227 –
A2222-10
DIRECT OUTWARD DIALLING (DOD)
PROGRAMMING
DESCRIPTION DATA
Assign the trunk numbers to required LEN. (1)
(2)
000-763: LEN
D000-D255: Trunk No.
Assign the data for Direct Outward Dialing
to the trunk number assigned by CM10.
NOTE: For Resident System Program,
refer to the Command Manual.
•
(1)
(2)
•
(1)
(2)
•
(1)
(2)
Y=00 Trunk Route allocation
000-255: Trunk No.
00-63: Trunk Route No.
NOTE
Y=01 Tenant Allocation
000-255: Trunk No.
00-63: Tenant No.
01 : Tenant No.
Y=08 Restriction on Night Mode
000-255: Trunk No.
0 : Restricted
1 : Allow
Assign the data for Direct Outward Dialing
to the Route number assigned by CM30
Y=00.
NOTE: For Resident System Program,
refer to the Command Manual.
•
(1)
(2)
•
(1)
(2)
•
(1)
(2)
Y=00 Kind of Route
00-63: Trunk Route No.
00: C.O.Line
Y=01 Type of Signal
00-63: Trunk Route No.
2 : DP (10 PPS)
3 : DP (20 PPS)
4 : DTMF
7 : DTMF
Y=02 OG/IC
00-63: Trunk Route No.
2 : Outgoing
3 : Bothway
CM30
CM35
START
CM10
A