PUSHBUTTON CALLING
– 392 –
A2382-10
PUSHBUTTON CALLING
PROGRAMMING
DESCRIPTION DATA
Assign the card number of DTMF receiver
to required LEN.
NOTE 1: A maximum of 32 DTMF receiv-
ers can be provided per PBX
system.
(1)
(2)
000-763: LEN
E201-E215: DTMF Receiver Card No.
(8RST)
For PIM0/1: E201-E203
For PIM2/3: E204-E207
For PIM4/5: E208-E211
For PIM6/7: E212-E215
NOTE 2: E200 is dedicated to built-in
DTMF Receiver of the MP
card.
Assign the type of telephone set to DTMF
stations.
This data assignment is not required for
D
term
stations.
•
(1)
(2)
Y=00
X-XXXXXXXX: Station No.
2: DTMF Telephone set
Assign DTMF receivers for use with DTMF
stations.
•
(1)
(2)
Y=0 Make Busy
XX Z
XX: DTMF Receiver Card No.
00: MP built-in DTMF Receiver
01-15: PN-8RST
Z : 0-3: Circuit No.
1 : In service
•
(1)
(2)
Y=1 Purpose
XX Z: Same as CM45 Y=0
1 : For both DTMF station and Tie
Line/DID
CM12
CM45
START
CM10
A
To Next Page
Loading...
