NEC NEAX 7400 ICS M100MX - Page 525

TENANT SERVICE
– 505 –
A2499-10
DESCRIPTION DATA
To provide external keys for Day Night
Mode change or Class of Service change,
assign a Tenant number to the DK card.
•
(1)
(2)
Y=00
XX Y
XX : 00-31: DK Card No. assigned by
CM10 (E900-E963)
Y : 0-3: Circuit No.
633: MP Built-in External Key Interface
00-63: Tenant No.
Specify the Tenants to be handled by each
ATT Group.
•
(1)
(2)
Y=0-3 ATT Group 0-3 assigned by
CM60 Y=00
00-63: Tenant No.
0 : To be handled
1 : Not to be handled
Specify whether Inter-Tenant connection
is available for station to station calling, In-
coming Call Termination and TAS answer.
•
(1)
(2)
Y=0 TAS Answer
XX ZZ
XX: Tenant No. of TAS Answer Station
ZZ: Tenant No. of Trunk
0 : Allow
1 : Restricted
•
(1)
(2)
Y=1 Station to Station Calling
XX ZZ
XX: Tenant No. of Calling Station
ZZ: Tenant No. of Called Station
0 : Restricted
1 : Allow
•
(1)
(2)
Y=2 Incoming Call Termination
XX ZZ
XX: Tenant No. of Called Station
ZZ: Tenant No. of Trunk
0 : Restricted
1 : Allow
CM63
CM61
A
END
CM62
INITIAL