NEC NLT-15C - Operations (TV) - Part 3; Direct Channel Selection; NICAM Broadcast Reception Modes; IGR Broadcast Reception Modes

OPERATIONS(TV)
NICAM Broadcast Selection
IGR (German stereo system) Broadcasts
23
Selecting channel
Using digit buttons to directly access channels
1. To select a one-digit channel: Input the channel number using the 0-9 number button directly
2. To select Two -digit channel numbers:Press -/-- to display - - ,then input the channel number.
3. To select Three -digit channel numbers: Press -/-- to display 1- -, then input the channel
number.
Note:
1. The maximum channel number is 199.
2. Be sure to enter the channel number within 3 seconds.
3. When you use the number buttons, you may directly select channels that were erased.
NICAM NICAM B Mono
This enables the selection of the reception mode when receiving a NICAM signal. To let you
enjoy NICAM broadcasting, this LCD TV set can receive stereo, bilingual, and monaural
broadcasts of the NICAM system.
Stereo
When the LCD TV set is receiving a stereo broadcast, you can press .
The mode changes between NICAM Stereo and Mono. When Mono is selected, the TV
sound is in Mono.
Bilingual
When the LCD TV set is receiving a bilingual programme, you can press ,
The mode changes as follows:
NICAM/A2
NICAM/A2
This enables the selection of the reception mode when receiving a IGR signal. To let you enjoy
IGR broadcasting, this LCD TV set can receive stereo and bilingual broadcasts of IGR system.
Stereo
When the LCD TV set is receiving a stereo broadcast ,you press NICAM/A2.
The mode changes between FM Stereo and Mono When Mono is selected, the TV sound is
in Mono.
Bilingual
When the LCD TV set is receiving a bilingual programme, you press NICAM/A2.
The mode changes between FMA and FMB.