Control Panel
1 2
43
1 POWER and
indicator
Press the “
” button to turn
on the projector. Refer to the
“Power On/Off the Projector”
section on pages 14-15.
2 SOURCE Press “SOURCE” to select an
input signal.
3 STATUS indi-
cator
Indicate the projector’s tempera-
ture status and Control Panel
Lock is enabled. Refer to the
Status Indicator on page 44.
4 LED indicator Indicate the projector’s light
source (LED) status. Refer to the
LED Indicator on page 44.
To Next Page
Loading...
