EasyManua.ls Logo

NEC NP-L50W - Specifications

NEC NP-L50W
62 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
45
... English
Appendices
Specications
Optical
Projection System Single DLP® chip (0.45”, aspect ratio 16:10)
Resolution
*1
1,039,680 pixels (similar to WXGA)
Lens Fixed lens, manual focus
F/15
Light Output
*2 *3
500 lumens
Contrast Ratio
*3
(full white:full black)
2500:1
Image Size (Diagonal) 17 to 100 inches / 0.432 to 2.540 m
Projection Distance
(mini. - max.)
20.5 to 118.1 inches / 52 to 300 mm
*1 Effective pixels are more than 99.99%.
*2 This is the light output value (lumens) when [Picture Mode] is set to [High-Bright] in the menu. If any other
mode is selected as [Picture Mode], the light output value may drop slightly.
*3 Compliance with ISO21118-200
Electrical
Inputs 1 x RGB/Component (D-Sub 15P), 1 x HDMI (19P) HDCP supported
*4
, 1 x SD Slot, 1 x
Video (RCA), 1 x USB Type-A, 1 x USB mini-B, 1 x Stereo Mini Audio
Service Port 1 x mini-B USB (for service purpose /shared with USB Display)
Color Reproduction 16.7 million colors simultaneously, Full color
Compatible Signals
*5
Analog: VGA/SVGA/XGA/WXGA/Quad-VGA/SXGA/SXGA+/WSXGA+/
480i/480p/576i/576p/720p/1080i/1080p
HDMI: VGA/SVGA/XGA/WXGA/Quad-VGA/SXGA/SXGA+/WSXGA+/
480p/576p/720p/1080i/1080p
Horizontal Resolution 540 TV lines: NTSC/NTSC4.43/PAL/PAL-M/PAL-N/PAL60
300 TV lines: SECAM
Scan Rate Horizontal: 30kHz to 100kHz
Vertical: 50 Hz to 85 Hz
Built-in Speaker 2W (monaural)
Power Requirement 100 – 240V AC, 50/60 Hz
Input Current 100 – 240V AC, 50-60Hz, 1.3-0.5A
Power Consumption Eco Mode: Off
110W +/-25%@ 110V AC(100-130V) / 105W +/-25%@ 220V AC(200-240V)
Eco Mode: On
75W +/-25% @ 110V AC(100-130V) / 70W +/-25% @ 220V AC(200-240V)
Standby: <0.5W (100-130V)/ <0.5W (200-240V)

Other manuals for NEC NP-L50W

Related product manuals