User Controls
Projecting Your Computer’s Screen
Image from the Projector via the USB
Cable (USB Display)
Using the supplied USB cable (or a commercially available USB
cable compatible with USB 2.0 specications) to connect the
computer with the projector allows you to send your computer
screen image to the projector for displaying. Power On/Off and
source selection of the projector can be done from your com-
puter without connecting a computer cable (VGA).
Note:
• To make USB DISPLAY available on Windows XP, the Windows user account
must have “Administrator” privilege.
• USB Display will not work in standby condition.
1. Turn on the projector.
2. Display the Multimedia and select USB-B (Connect PC)
source.
3. Use the supplied USB cable to connect the USB-B port of
the projector and the USB port (A type) of your computer.
4. Select “DoUSB” and then press “Enter”.
When you see a message as left; Wait at least 10 seconds. This
allows you to project your computer’s screen image.
To Next Page
Loading...
