NEC NP-NC1000C - Title Setup and Information

47
4. Using Menus
4-5. Title Setup
Sets the title to be assigned to the preset buttons (<1> to <8> buttons) (up to 16 titles).
Request your dealer/distributor to perform the settings.
4-6. Information
Displays the hours of lamp use, the version information and error codes.
4-6-1. Lamp
Displays information relating to the lamp.
Output
Displays the lamp mode and lamp output power value (W).
← Selects the item to display.
← Displays the lamp mode.
← Displays the current power value (W).
Voltage
Displays the voltage value (V) of the currently used lamp.
← Selects the item to display.
← Displays the voltage value (V) of lamp 1.
← Displays the voltage value (V) of lamp 2.
Serial
Displays the serial number of the currently used lamp.
← Selects the item to display.
← Displays the serial number of lamp 1.
← Displays the serial number of lamp 2.
4-6-2. Lens Type
Displays the current lens type setting. The lens type setting is configured from “Lens Type” in the “Configuration” - “Installation”
menu (page 44).
← Displays the current lens type setting.
Without Sensor Using a lens unit that does not support the lens memory function.
With Sensor Using a lens unit that supports the lens memory function.