NEC NP-NC1000C - Whats in the Box? and Projector Parts; Features Overview

7
1.
What’s in the Box? and
the Names of the
Projector Parts
1-1. Features
• DLPCinema
®
projector
Complies with the strict projection standards defined by the Digital Cinema Initiatives (DCI) industry group in the United States
using leading imaging technology of NEC. It also supports 3D projection and high frame rates (HFR).
• Reducedinstallationspaceandincreasedfreedomthroughamorecompactandlightweightbody
By employing a compact 0.69” DLP Cinema chip, the DLP Cinema projector is compact and lightweight with dimensions of
621mm (wide) × 798mm (deep) × 314mm (high) and weight of approximately 44kg.
The projector does not need to be connected to an external exhaust duct. It also supports installation on both the floor and
ceiling. Therefore the projector delivers reduced installation space and improved freedom. A wide variety of optional lenses
(sold separately) are also available for the projector in order to support a wide variety of installation methods (a lens is not
mounted when the projector is shipped from the factory).
• Reducedmaintenancetimethroughthelampreplacementattheunitlevel
The lamps can be replaced at the unit level. This method makes the lamp replacement easier and greatly reduces the time for
maintenance work. The projector operates while keeping power consumption to a minimum through the adoption of a high-
pressure mercury lamp.
By employing a two lamp system, even if one lamp is extinguished, projection can continue using the other lamp although the
brightness is degraded (the projector does not comply with DCI standards when using only a single lamp).
• Equippedwitheasytousefunctions
(1) Equipped with a lens memory function and light memory function that makes it possible to use one touch adjustment
settings
The projector is equipped with a lens memory function that saves the zoom position and the shift position of the lens and
a light memory function that saves the brightness setting for each input signal. This allows you to project using preconfig-
ured settings simply by selecting the signal even if you are projecting multiple different input signals with different screen
size and brightness settings (refer to “6-9. Related products list” (page 84) for details on the lenses that support the lens
memory function).