NEC NP-NC1000C - Page 50

50
4. Using Menus
4-6-8. Setup Date
Displays the date when the projector was set up (starting date of the warranty period).
← Displays the date when the projector was set up (starting date of the warranty
period).
4-6-9. Option Status
Displays the link status of the device mounted in slot on the projector. The device name is displayed in ( ) when the projector
is in standby or when connection to the device cannot be confirmed.
← Displays the link status of the device in slot.
 •NP-90MS:NP-90MS01/NP-90MS02
 •<VendorName>IMB:Mediablock
 •NoBoard:Nodevicemounted