12
2.4 Error code list
The following table lists the combinations of error codes (ERR1 and ERR2) and describes the error indicated by each
combination.
ERR1 ERR2 Error description
00h 00h The command cannot be recognized.
00h 01h The command is not supported by the model in use.
01h 00h The specified value is invalid.
01h 01h The specified input terminal is invalid.
01h 02h The specified language is invalid.
02h 00h Memory allocation error
02h 02h Memory in use
02h 03h The specified value cannot be set.
02h 04h Forced onscreen mute on
02h 06h Viewer error
02h 07h No signal
02h 08h A test pattern or filer is displayed.
02h 09h No PC card is inserted.
02h 0Ah Memory operation error
02h 0Ch An entry list is displayed.
02h 0Dh The command cannot be accepted because the power is off.
02h 0Eh The command execution failed.
02h 0Fh There is no authority necessary for the operation.
03h 00h The specified gain number is incorrect.
03h 01h The specified gain is invalid.
03h 02h Adjustment failed.
To Next Page
Loading...
Need help?
General
