68
3.39 [ 097-8. ECO MODE REQUEST ]
Gets the value set for the eco mode.
Information
Depending on the projector, the value for the "Light mode" or "Lamp mode" will be returned.
Command
03h B0h 00h 00h 01h 07h BBh
Response
4 When the command succeeds
23h B0h <ID1> <ID2> 02h 07h <DATA01> <CKS>
Data part
Item Description
DATA01 Value set for the eco mode
Information
For information about the values set for the eco mode, see the Appendix "Supplementary Information by
Command".
4 When the command fails
A3h B0h <ID1> <ID2> 02h <ERR1> <ERR2> <CKS>
To Next Page
Loading...
Need help?
General
