EasyManuals Logo

NEC NP-UM352W Reference Manual

NEC NP-UM352W
96 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Page #6 background imageLoading...
Page #6 background image
6
Connection via a network
Information
Before connecting an external device via a network, check with the network administrator.
Some models cannot receive commands in standby mode. See Appendix "Standby Mode setting for receiving
commands".
4 Connection using a wired LAN
This method connects a PC and the projector using a LAN cable. For information about the type of LAN cable to be
used (straight or cross), contact the network administrator. The pin assignment of the LAN port is shown below.
<LAN port (RJ-45 8-pin connector)>
Pin number Function Description
1 TD+ Transmit Data (+)
2 TD- Transmit Data (-)
3 RD+ Receive Data (+)
4
Not used
5
Not used
6 RD- Receive Data (-)
7
Not used
8
Not used
4 Connection using a wireless LAN
This method connects a PC via a wireless LAN by connecting a wireless LAN unit to the projector. For information
about the available wireless LAN units, see the operation manual of the model in use.

Table of Contents

Other manuals for NEC NP-UM352W

Questions and Answers:

Question and Answer IconNeed help?

Do you have a question about the NEC NP-UM352W and is the answer not in the manual?

NEC NP-UM352W Specifications

General IconGeneral
BrandNEC
ModelNP-UM352W
CategoryProjector
LanguageEnglish

Related product manuals