9
Command Description Page to
see
078-1. SETTING REQUEST Gets information of the projector. 58
078-2. RUNNING STATUS REQUEST Gets the information about the operation status of the
projector.
59
078-3. INPUT STATUS REQUEST Gets the information about the input signal status of the
projector.
60
078-4. MUTE STATUS REQUEST Gets the mute status of the projector. 62
078-5. MODEL NAME REQUEST Gets the model name of the projector. 64
078-6. COVER STATUS REQUEST Gets the status of the mirror cover or lens cover. 65
079. FREEZE CONTROL Controls whether to turn the freeze function on or off. 66
084. INFORMATION STRING REQUEST Gets information strings (English) displayed on the projector. 67
097-8. ECO MODE REQUEST Gets the value set for the eco mode. 68
097-45. LAN PROJECTOR NAME REQUEST Gets the projector name. 69
097-155. LAN MAC ADDRESS STATUS REQUEST2 Gets the MAC address of the projector. 70
097-198. PIP/PICTURE BY PICTURE REQUEST Gets the value set for the picture in picture and picture by
picture.
71
097-243-1. EDGE BLENDING MODE REQUEST Gets the value set for the edge blending. 73
098-8. ECO MODE SET Sets the eco mode. 74
098-45. LAN PROJECTOR NAME SET Sets the projector name. 75
098-198. PIP/PICTURE BY PICTURE SET Sets the picture in picture or picture by picture. 76
098-243-1. EDGE BLENDING MODE SET Sets the edge blending. 78
305-1. BASE MODEL TYPE REQUEST Gets the base model type of the projector. 79
305-2. SERIAL NUMBER REQUEST Gets the serial number of the projector. 80
305-3. BASIC INFORMATION REQUEST Gets the operation status of the projector. 81
319-10. AUDIO SELECT SET Sets the audio select. 83
To Next Page
Loading...
Need help?
General
