NEC P501X - User Manual

P501X/P451X
P451W/P401W
PE501X Quick Setup Guide
P501X/P451X
P451W/P401W
PE501X Quick Setup Guide
COMPUTER IN
COMPUTER IN
Connect your computer to the projector.
Připojte počítač k projektoru.
Slut computeren til projektoren.
Συνδέστε τον υπολογιστή σας στον προβολέα.
Kytke tietokone projektoriin.
Csatlakoztassa a számítógépet a projektorhoz.
Sluit uw computer aan op de projector.
Koble datamaskinen til projektoren.
Podłącz komputer do projektora.
Bilgisayarınızı projektöre bağlayın.
Supplied computer cable (VGA)
Dodávaný kabel k počítači (VGA)
Medfølgende computerkabel (VGA)
Παρεχόμενο καλώδιο υπολογιστή (VGA)
Mukana toimitettu tietokonekaapeli (VGA)
A mellékelt számítógépkábel (VGA)
Bijgeleverde computerkabel (VGA)
Inkludert datakabel (VGA)
Dostarczony przewód do komputera (VGA)
Ürünle birlikte verilen bilgisayar kablosu (VGA)
Connect the supplied power cord.
Zapojte dodaný napájecí kabel.
Tilslut det medfølgende strømkabel.
Συνδέστε το παρεχόμενο καλώδιο ρεύματος.
Kytke mukana toimitettu virtajohto.
Csatlakoztassa a mellékelt tápkábelt.
Sluit de meegeleverde voedingskabel aan.
Koble til strømkabelen som følger med.
Podłącz dostarczony przewód zasilający.
Ürünle birlikte verilen güç kablosunu takın.

NEC P501X Specifications

General

Native aspect ratio	4:3
Projection distance	0.6 - 13.8 m
Vertical scan range	50 - 120 Hz
Horizontal scan range	15 - 100 kHz
Projection technology	3LCD
Supported aspect ratios	4:3, 16:9, 16:10
Contrast ratio (typical)	4000:1
Screen size compatibility	25 - 300 \
Projector native resolution	XGA (1024x768)
Keystone correction, horizontal	-30 - 30 °
Projector brightness (economic mode)	3000 ANSI lumens
Zoom capability	Yes
Focal length range	17.4 - 29 mm
Aperture range (F-F)	1.7 - 2
Lamp type	UHP
Lamp power	270 W
Light source type	Lamp
Service life of light source	4000 h
Service life of light source (economic mode)	6000 h
3D	No
Analog signal format system	NTSC, NTSC 3.58, NTSC 4.43, PAL, PAL 60, PAL M, PAL N, SECAM
Supported graphics resolutions	1024 x 768 (XGA), 1920 x 1200 (WUXGA)
RMS rated power	16 W
Number of built-in speakers	1
Built-in display	-
Serial interface type	RS-232
USB 2.0 ports quantity	3
Noise level	30 dB
Certification	CE; ErP; TÜV GS
Noise level (economic mode)	37 dB
Product type	Standard throw projector
Product color	White
Power source	AC
AC input voltage	100 - 240 V
AC input frequency	50 - 60 Hz
Power consumption (standby)	10 W
Power consumption (typical)	292 W
Power consumption (PowerSave)	248 W
Sustainability certificates	RoHS

Weight and Dimensions

Depth	282 mm
Width	398 mm
Height	115 mm
Weight	4100 g

Summary

Step 1 Connect your computer to the projector

Step 2 Connect the supplied power cord

Step 3 Slide the lens cover to the left to uncover the lens

Step 4 Turn on the projector

Step 5 Select a source

Step 6 Adjust the tilt foot

Adjustable Tilt Foot Lever

Lever for adjusting projector tilt.

Rear Foot

The rear support foot for tilting the projector.

Rotate the lens shift dial (Lens shift)

Manual Keystone Correction

Step 7 Power Off and Disconnect Cables