Do you have a question about the NEC P502H and is the answer not in the manual?
Native aspect ratio | 16:9 |
---|---|
Projection distance | 0.8 - 14.2 m |
Projection technology | DLP |
Supported aspect ratios | 16:10, 16:9 |
Contrast ratio (typical) | 6000:1 |
Screen size compatibility | 30 - 300 \ |
Projector native resolution | 1080p (1920x1080) |
Keystone correction, vertical | 0 - 62 ° |
Vertical synchronization (max) | 120 kHz |
Vertical synchronization (min) | 50 kHz |
Keystone correction, horizontal | -25 - 25 ° |
Horizontal synchronization (max) | 100 kHz |
Horizontal synchronization (min) | 15 kHz |
Focus | Manual |
Throw ratio | 1.24 - 2.11:1 |
Zoom capability | Yes |
Focal length range | 18.2 - 31.1 mm |
Aperture range (F-F) | 2 - 2.5 |
Lamp type | UHP |
Lamp power | 375 W |
Lamps quantity | 1 lamp(s) |
Light source type | Lamp |
Service life of light source | 4000 h |
Service life of light source (economic mode) | 5000 h |
Analog signal format system | NTSC, NTSC 3.58, NTSC 4.43, PAL, PAL 60, PAL M, PAL N, SECAM |
DVI port | No |
Composite video in | 1 |
Serial interface type | RS-232 |
USB 2.0 ports quantity | USB 2.0 ports have a data transmission speed of 480 Mbps, and are backwards compatible with USB 1.1 ports. You can connect all kinds of peripheral devices to them. |
S-Video inputs quantity | 0 |
Maximum digital resolution | 1920 x 1080 pixels |
Noise level | 36 dB |
Certification | CE; ErP; TÜV GS |
Noise level (economic mode) | 31 dB |
RMS rated power | 20 W |
Placement | Desktop, Ceiling |
Product type | Large venue projector |
Product color | White |
Cable lock slot type | Kensington |
Power source | AC |
AC input voltage | 100 - 240 V |
Power consumption (max) | 445 W |
Power consumption (standby) | 0.5 W |
Power consumption (typical) | 366 W |
Power consumption (economy mode) | 305 W |
Cables included | AC, VGA |
Remote control type | IR |
Sustainability certificates | RoHS |
Depth | 302 mm |
---|---|
Width | 362 mm |
Height | 129 mm |
Weight | 5200 g |
Details the supplied computer cable for VGA connection.
Controls for adjusting projector lens position horizontally and vertically.
Description of the focus ring for adjusting image sharpness.
Description of the zoom lever for adjusting image size.
Instructions for operating the projector's power and standby buttons.
Final steps involve removing the lens cap and disconnecting cables.