NEC PA622U - Page 129

115
5. Using On-Screen Menu
PROGRAM TIMER
Thisoptionturnson/standbythe projectorandchangesvideo signals,and selects ECOmodeautomaticallyat a
speciedtime.
NOTE:
• Beforeusing[PROGRAMTIMER],makesurethatthe[DATEANDTIME]featureisset.(→ page 118)
 MakesurethattheprojectorisinthestandbyconditionwiththePOWERcordconnected.
 Theprojectorhasabuilt-inclock.Theclockwillkeepworkingforabouttwoweeksafterthemainpoweristurnedoff.Ifthemain
powerisnotsuppliedtotheprojectorfortwoweeksormore,thebuilt-inclockstopsworking.
Setting a new program timer
1. On the PROGRAM TIMER screen, use the ▲ or ▼buttontoselect[SETTINGS]andpresstheENTERbut-
ton.
 The[PROGRAMLIST]screenwillbedisplayed.
2. Select a blank program number and press the ENTER button.
 The[EDIT]screenwillbedisplayed.
3. Make settings for each item as required.
ACTIVE ������������������ Place a check mark to enable the program�
DAY ������������������������ Select days of the week for the program timer� To execute the program from Monday to Friday, select [MON-