NEC PA622U - Connecting the Projector to the Media Server

250
9. Using the Viewer (MM Models)
Connecting the projector to the media server
Pressthe9/USB-Abuttonontheremotecontrol.
TheVIEWERwillstart.
• Whenoperatingwiththemainbody,usethe“INPUT”buttontoselect[9:USB-A].
• Thiswillstartsearchingforacomputerwith“mediasharing”enabledinthenetworkandaddittothe“Mediaserver”
ofthethumbnailscreen.
 Anotherwaytodothisistopointthecursorto“Mediaserver”andselect[REFRESH]fromthethumbnailmenu
andpresstheENTERbutton.
NOTE:
• Uptofouraccessiblemediaserverscanbeautomaticallysearchedanddisplayed.Thefthdeviceorlatercannotbedisplayed.
(→page229)