Packard Bell EasyNote M5/M7 Disassembly Manual
10
Removing the Memory Module
To remove the Memory Module, first remove the Battery (see Removing the Battery),
remove the Keyboard (see Removing the Keyboard) then perform the following steps:
1. Release the screws retaining the memory module slot cover.
Fig. 11 Removing the screw retaining the memory module slot cover
2. Unclip the memory module as shown in Fig. 12
Fig. 12 Removing the memory module
3. Remove the memory module from its slot and put it aside.
M2x2.5 silver
To Next Page
Loading...
