EasyManua.ls Logo

NEC Packard Bell EasyNote M5 - Removing the WLAN Module

NEC Packard Bell EasyNote M5
28 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
Packard Bell EasyNote M5/M7 Disassembly Manual
25
Removing the WLAN Module
To remove the WLAN Module on Versa E400/EasyNote M5, first remove the Main Board
(see
Removing the Main Board), then perform the following steps: To remove the WLAN
Module on EasyNote M7, first remove the Keyboard (see
Removing the Keyboard), then
perform the following steps:
1. Disconnect the WLAN antenna connection on the WLAN Module then unclip it as
shown in Fig. 41
Fig. 41 Removing the WLAN Module
2. Carefully lift up the WLAN module and put it aside.
Note: The location of the WLAN module in the EasyNote M5 is different than the one in the
EasyNote M7. On the M7 the WLAN module is located under the keyboard. On the M5 the WLAN
module is next to the PCMCIA slot.

Related product manuals