Packard Bell EasyNote M5/M7 Disassembly Manual
18
7. Remove the screws on both sides of the LCD panel in order to release the LCD
hinges as shown in Fig. 27
Fig. 27 Removing the LCD Panel hinges
8. Release the speakers at both sides of the LCD back cover as shown in Fig. 28
Fig. 28 Removing the Speakers
Removing the CPU
To remove the CPU, first remove the battery (see Removing the Battery), then perform the
following steps:
1. Remove the screw retaining the CPU Cover as shown in Fig. 29
Fig. 29 CPU Cover
M2x3.5 black
M2x3.5 black
M2.5x5 black
To Next Page
Loading...
