NEC Packard Bell EasyNote M5 - Removing the 14 LCD Panel

Packard Bell EasyNote M5/M7 Disassembly Manual
15
7. Remove the screws on both sides of the LCD panel in order to release the LCD
hinges as shown in Fig. 21
Fig. 21 Removing the LCD Panel hinges
Removing the 14" LCD Panel
To remove the LCD panel, first remove the LCD module (see Removing the LCD Module),
then perform the following steps:
1. Use a pin to the remove rubber covers on the LCD module as shown in Fig. 22
Fig. 22 Removing the rubber covers on the LCD Module
M2x3.5 black