Packard Bell EasyNote M5/M7 Disassembly Manual
7
Removing the Optical Disk Drive
To remove the ODD, first remove the battery (see Removing the Battery), then the HDD
Cover (see Removing the Hard Disk Drive), then perform the following steps:
1. Remove the screws retaining the optical drive connector as shown in Fig. 5
Fig. 5 Releasing the optical drive
2. Push the metal plate in the HDD compartment in order to disconnect the optical
drive out from the base unit as shown in Fig. 6
Fig. 6 Removing the optical drive
M2.5x5 black
To Next Page
Loading...
