Packard Bell EasyNote M5/M7 Disassembly Manual
14
4. Unscrew all screws encircled in Fig. 19
Fig. 19 Removing the LCD panel screws
5. Remove the Side Rubber Covers at the side of the LCD. Release all four screws.
Fig. 20 Remove Side Rubber Covers
6. Carefully lift up LCD panel together with the Inverter board and disconnect the
power cable from the Inverter board. Disconnect the inverter connector remaining
on the left side of the inverter board. Put a side the inverter board.
A=M2.5x7 black
B=M2x4 black
M2x4 black
To Next Page
Loading...
