NEC PE401H - Setting | Signal

44
English ...
User Controls
PHASE
Synchronize the signal timing of the display with the graphic card.
If the image appears to be unstable or  ickers, use this function to
correct it.
CLOCK
Change the display data frequency to match the frequency of
your computer’s graphic card. Use this function only if the image
appears to  icker vertically.
H. POSITION

Press the button to move the image left.

Press the button to move the image right.
V. POSITION

Press the button to move the image down.

Press the button to move the image up.
“SIGNAL” is
only supported in
Analog VGA (RGB)
signal.
SETTING |
SIGNAL