NEC PE401H - Change Password

47
... English
User Controls
CHANGE PASSWORD
1. Press ENTER to enter SECURITY KEYWORD setting.
2. The password has to be 4 digits.

Current password
3. Use number buttons on the remote control, to enter your
old password and then press ENTER to con rm your
password.

Input new password
4. Use number buttons on the remote control, to enter your
new password and then press ENTER to con rm your
password.

Con rm new password
5. Enter the new password again and press ENTER to
con rm.

If the incorrect password is entered 3 times, the projector will
automatically shut down. (When turn on the projector.)

If you have forgotten your password, please contact your local
of ce for support.
Password default
value is “1234”
( rst time).