NEC PE401H - Specifications

66
English ...
Appendices
Specications
Optical
NP-PE401H
Projection System Single DLP
®
chip (0.65”, aspect ratio 16:9)
Resolution
*1
1920 × 1080 pixels (1080P)
Lens Manual focus/manual zoom
F2.4 (wide): F3.29 (tele)
Lamp 330W AC (248W in ECO mode)
Light Output
*2 *3
4000 lumens
Approx. 75% in ECO mode
Contrast Ratio
*3
(full white:full black)
2000:1 with DYNAMIC CONTRAST ON
Image Size (Diagonal) 23 to 200 inches/0.58 to 5.08 m
Projection Distance
(mini. - max.)
32 to 474 inches/0.82 to 12.0 m
*1 Effective pixels are more than 99.99%.
*2 This is the light output value (lumens) when [Picture Mode] is set to [High-Bright] in the menu. If any other
mode is selected as [Picture Mode], the light output value may drop slightly.
*3 Compliance with ISO21118-200
Electrical
NP-PE401H
Inputs 1 x RGB/Component (D-Sub 15P), 2 x HDMI (19P) HDCP supported
*4
, 1 x S-Video
(DIN 4P), 1 x Video (RCA), 1 x (L/R) RCA Audio, 1 x Stereo Mini Audio
Outputs 1 x RGB (D-Sub 15P) (Separate sync signal only), 1 x Stereo Mini Audio
PC Control 1 x PC Control Port (D-Sub 9P)
Wired LAN Port 1 x RJ-45 (10/100 BASE-T)
Service Port 1 x USB (for service purpose only)
Others 1 x USB (type A) for future use
Color Reproduction 1.07 billion colors simultaneously, Full color
Compatible Signals
*5
Analog: VGA/SVGA/XGA/XGA+/WXGA/Quad-VGA/WXGA+/SXGA/SXGA+/
WXGA+/UXGA/HD/Full HD/
480i/480p/576i/576p/720p/1080i/1080p
HDMI: VGA/SVGA/XGA/WXGA/Quad-VGA/SXGA/SXGA+/WXGA+/
WXGA++/WSXGA+/
480i/480p/576i/576p/720p/1080i/1080p
Horizontal Resolution 540 TV lines: NTSC/NTSC4.43/PAL/PAL-M/PAL-N/PAL60
300 TV lines: SECAM
Scan Rate Horizontal: 30 kHz to 100 kHz (RGB: 24 kHz or over)
Vertical: 50 Hz to 120 Hz (HDMI: 50 to 85 Hz)
Sync Compatibility Separate Sync
Built-in Speaker 8W x 2 (monaural)