NEC PE506WL - ❷ Enter through a Web Browser; Connecting Your Computer

62
6. Network control
❷ Enter through a Web browser
Connecting Your Computer
1) Start the computer's Web browser.
2) Enter the IP address on the projector set in the URL input field of the Web browser. The "Network Display System"
window for your projector will be displayed.
3) Click [Login] at the top left of the window.
4) Enter the password in the [Password], then click [Login]
"* " the factory default setting is the user name: "admin" (administrator privileges), password: "admin".
NOTE:
• Users can click on the top right corner of the Web browser screen to select the display language and available languages are English,
Japanese, Traditional Chinese, Simplified Chinese.
• Do not start multiple Web browser settings or control. Do not use more than one computer set or control the projector.
• Please change your password.
• If the network does not appear on screen controls, please consult your network administrator.
• Please refresh the web page before operating the projector.
Description of each option
①
②
③
④
⑤
① System status: Click this option to display the [System status] page.
② General setup: Click this option to display the [General setup] page.
③ Picture setup: Click this option to display the [Picture setup] page.
④ Image setup: Click this option to display the [Image setup] page.
⑤ Network setup: Click this option to display [Network setup] page.