NEC Display Solutions of America, Inc.
PH2601QL & PH3501QL Installation Guide
Desktop and Ceiling Mount Rev 1.0
www.necdisplay.com PH2601QL/PH3501QL Page 1 of 11
Contents
Product Description, Lens Specs, Screen/Aspect Ratio
Notes and Specifications Pg 1
Distance Charts and Formulas Pg 1-2
Lens Shift Adjustable Range Pg 3
Cabinet Dimensions (Front, Top, Left, Right, Back) Pg 4
Cabinet Dimensions (Bottom) Pg 5
Fly Cage Dimensions Pg 6-7
Ventilation Requirements Pg 8
Regulatory Labels Pg 9
Input Panel and Button Panel Pg 10
Control Codes Pg 11
Product Description
Type: 3 chip DMD Reflection Type Dimensions: 27.4”(W) x 17.9”(H) x 46.5”(D)
1.38 in. 2x LVDS DMD Weight: 372.6 lbs. / 169kg
Resolution: 4090 x 2160 (17:9) Brightness: PH2601QL: 26,000 Lumens
PH3501QL: 35,000 Lumens
Fan Noise: 55 dB / 43dB @ 1 meter
Power Consumption: 1392W (max) BTU’s: 3754 BTU/hour
Network Ready, integrated wired and wireless adapter
Powered: Horizontal & Vertical Lens Shift, Zoom, Focus
Lens Specifications
L2K-10F1: Throw Ratio: 0.9:1 Focal Length: 18.6 – 26.7mm
Screen Sizes: 100-500” F/#: 2.5
L4K-11ZM: Throw Ratio: 1.10 – 1.70:1 Focal Length: 20.7 – 32.7mm
Screen Sizes: 100-500” F/#: 2.5 ___ ______
L4K-15ZM: Throw Ratio: 1.50 – 2.10:1 Focal Length: 25.2 – 42.0mm
Screen Sizes: 100-500” F/#: 2.5
L4K-20ZM: Throw Ratio: 2.00 – 3.40:1 Focal Length: 32.2 – 60.3mm
Screen Sizes: 100-500” F/#: 2.5 ___ ______
L2K-30ZM: Throw Ratio: 2.70 – 3.90:1 Focal Length: 62.1 – 97.8mm
Screen Sizes: 100-500” F/#: 2.5 ___ ______
L2K-43ZM1: Throw Ratio: 3.70 – 5.30:1 Focal Length: 62.1 – 97.8mm
Screen Sizes: 100-500” F/#: 2.5 ___ ______
L2K-55ZM1: Throw Ratio: 4.80 – 7.40:1 Focal Length: 62.1 – 97.8mm
Screen Sizes: 100-500” F/#: 2.5 ___ ______
Screen/Aspect Ratio
4:3, 16:9 and 16:10 screens are fully supported with proper aspect ratio control for both type sources using NEC developed
scaling technology. Menu selections have settings for each screen type and aspect ratio control for each source type.
Notes
For screen sizes not indicated on the projection tables, use the formulas below.
If the figures on the tables do not match the results of formulas, use the figures in the table..
Distances are in inches, for millimeters multiply by 25.4.
Distances may vary 5%.
To Next Page
Need help?
General
