⁄ACooling Operation Mode
( LED lamp ON)
— 9 —
2
Select Cooling Operation.
Press the Operation Mode Selection Button.
Each time the button is pressed, the operation mode is shifted in the arrow direction.
• Select the fan speed in four steps
-low, medium, high, AUTO.
• The display shows high fan
speed.
Operation Display
Cooling Operation
Soft Dry Operation
Auto Operation
Heating Operation
(Heat pump model only)
1
Press the Start/Stop Button.
4
Set the fan speed.
3
Set the temperature
lower than the room
temperature.
• The temperature can be set
within a range of 18°
C
~ 30°
C
by
1°
C
.
To raise the Temperature
To lower the Temperature
• Two short beeps will sound and the
operation lamp will light up.
Beep, Beep
● Each time the button is pressed, the fan speed mode is
altered.
To Next Page
Loading...
