NEC SL 1000 - System Start-Up

NEC Confidential
© NEC Corporation 2009
Page 16
System Start Up
Main software and “Default” data will be loaded. (System Initialization)
1. Keep pressing “Load” Button on CD-CP00 Blade.
2. AC Power switch ON.
3. Keep pressing “Load” Button about 3-4 sec.
4. Release “Load” Button.
5. Wait about 1-2 min.
There are 2 types of startup mode :
Main software and “Customer” data will be loaded. (System Reset)
1. AC Power Switch ON.
or
AC Power Switch OFF and ON.
COLD Start
HOT Start
บริษัท โปรเฟสชั
�
นแนล พีเอบีเอ็กซ์ จํา
กัด โทร. 02-519-1718 Hotline. 084-920-5065