NEC SL 1000 - Power Failure Transfer

NEC Confidential
© NEC Corporation 2009
Page 8
Power Failure Transfer
• SLT is connected to the Extension Port No. 8/16/24/32.
• Change the switch position of “J6” from “KT” to “PF”. (Default : KT)
Connected extension must be SLT.
Trunk Port Ext. Port
No. 1 No. 8
No. 4 No. 16
No. 7 No. 24
All terminals on Slot No.4 must be Analog
Terminals.
บริษัท โปรเฟสชั
�
นแนล พีเอบีเอ็กซ์ จํากัด โทร. 02-519-1718 Hotline. 084-920-5065