NEC Confidential
© NEC Corporation 2009
Page 17
Accessing Programming (1)
• Programming can be accessed 3 separate ways :
From Display type Desktop Terminal
Possible to set the data by following the manual.
Web Programming
Doesn’t need special application because the application is built into
CPU (IP4xx-CPU-A1) . Just standards Web browser is necessary, and on-line
programming is available.
PC Programming
The special application which is provided by NEC-i should be installed on the
PC that will be used for PC PRO. Doesn’t need real DRACO system, off-line
programming is also available, and the customer data can be saved on the PC.
• 3 default passwords/Levels are built into the System. (IN / SA / SB)
• The “IN (Installer)” Level has full access to all programs.
• The “SA / SB (System Admin)” Levels have limited access.
บริษัท โปรเฟสชั
�
นแนล พีเอบีเอ็กซ์ จ
ํากัด โทร. 02-519-1718 Hotline. 084-920-5065
To Next Page
Loading...
