NEC Confidential
© NEC Corporation 2009
Page 27
Data Save and Shutdown
The Customer Data can be saved to CF Card.
1. Insert the CF Card to “CF Slot” at VM-21.
2. Enter to the Programming Mode.
3. PRG 90-03. (Dial 90, 03, 01)
4. Dial “1” and press HOLD Key.
5. Wait about 1 min. (depends on the system size)
6. Display will be changed to next PRG No. after completing the saving.
7. Exit from Programming Mode.
8. Remove the CF Card.
The system shall be “OFF” by pressing AC Power switch located at Power Supply.
Customer Data Saving (to CF Card)
System Shut Down
• DO NOT power off by disconnecting the AC power.
• In case of 4 Cabinets, Power ON/OFF should be done from 2nd & 3
rd
& 4
Cabinet.
บริษัท โปรเฟสชั
�
นแนล พีเอบีเอ็กซ์ จ
ํากัด โทร. 02-519-1718 Hotline. 084-920-5065
To Next Page
Loading...
