Page 4 of 9
Service: 604 -856- 9155
Email: service@natg.ca
Online System Programming
Logging in to Web Pro:
1. Using Internet Explorer , enter IP Address . . . Note: If you do not
have your IP address, please contact your IT department or NATG (charges may apply)
2. Enter User Name: USER1
3. Enter Password: 1111
4. Press Enter OR Click
Important Note: When finished
making your programming changes, make sure to log out of programming to avoid accidental changes
To Log Out: From the Home page, click Logout
Changing the Name of a Set:
1. Log in to Web Pro
2. Click
3. Click on the Details bar next to the extension you would like to change
4. Enter the new employee’s name
5. Click Apply when finished
System Speed Dials:
1. Log in to Web Pro
2. Click
3. Choose the speed dial number you’d like to program/change (click the right or left arrow to scroll
through other pages)
4. Enter the phone number you’d
like to program (with no 9 in front
and no dashes (if it’s long distance
number you must enter a 1 in
front or the number))
5. Enter the Name of the contact
(can be between 1 & 12 characters) (leave all other columns blank)
6. Click Apply when finished
Changing the Date & Time:
1. Log in to Web Pro
2. Click
3. Enter correct date and date information
4. Click Apply when finished
To Next Page
Loading...
