EasyManuals Logo

NEC SV8300 User Guide

NEC SV8300
12 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Page #4 background imageLoading...
Page #4 background image
8
3. FEATURE OPERATION
1. Lift handset or press SPEAKER key, receive internal dial tone.
2. Dial 9 to receive an outside dial tone.
3. Dial desired telephone number.
4. Use handset or MIC to converse,
1. Lift handset or press SPEAKER key.
2. Receive extension dial tone.
3. Dial desired station number.
4. Use handset or MIC to converse.
1. To use the hands-free ability of the telephone press the ―SPEAKER‖ button
2. Ensure the ―MIC‖ key is lit which enables the built in microphone located at the
bottom right corner of the telephone. If it isn’t lit you will be able to hear the
caller but they will not be able to hear you!
3. At any time you may pick up the handset! To go from the handset to hands-free
press the ―SPEAKER‖ button before replacing the handset in the cradle.
NOTE: To use the dynamic dial-pad simply start dialing the telephone
number and the phone will automatically go hands-free.
TO ORIGINATE AN OUTSIDE CALL
TO ORIGINATE AN INTERNAL CALL
HANDS-FREE/SPEAKER/DYNAMIC DIAL-PAD PHONE
9
ORIGINATING A VOICE CALLHANDS-FREE
HEADSET OPERATION
1. To use a headset press the ANSWER key to activate the headset port on the base of
the telephone, the ANSWER button will light red when activated. When the ANSWER
key is lit the handset will be inactive.
2. Use the RECALL key to release or hang-up on the call when using the headset
3. To return to using the handset press the ANSWER key to deactivate the button, the
ANSWER light is off for handset operation
NOTE: If the ANSWER key is already activated to answer an inbound call using your
headset press the ringing extension button
NOTE: To adjust the ringing volume when using the headset use the Up/Down key during
ringing
1. Lift handset
2. Dial desired station number.
3. Press the Voice soft-key or press 1.
Note: If privacy is required, lift handset.
1. During a handset or headset conversation the transmit can be muted by the use of the
MUTE soft-key
2. To resume speaking press the MUTE soft-key a second time
NOTE: While muting the handset/headset you are still monitoring the caller
MUTE KEY

Other manuals for NEC SV8300

Questions and Answers:

Question and Answer IconNeed help?

Do you have a question about the NEC SV8300 and is the answer not in the manual?

NEC SV8300 Specifications

General IconGeneral
BrandNEC
ModelSV8300
CategoryTelephone
LanguageEnglish

Related product manuals