14
1. Press TRANSFER. Receive interrupted dial tone.
2. Dial destination station’s extension, hang up to complete the transfer or wait for
answer if using a supervised transfer.
3. To return to original caller, press TRANSFER
Note: If using supervised transfer and you receive voicemail, press * 4 times to
cancel voicemail, then proceed with step 3
1. Press TRANSFER. Receive interrupted dial tone.
2. Dial 0, hang up or wait for answer.
3. To return to original caller, press TRANSFER
1. Press TRANSFER. Receive interrupted dial tone.
2. Dial destination stations extension.
3. Press the message key and hang up to complete the transfer.
Note: To return to original caller, press TRANSFER prior to step 3
TO TRANSFER A CALL
TO TRANSFER A CALL TO RECEPTION
TO TRANSFER A CALL TO VOICEMAIL
15
1. With call in progress, press TRANSFER - receive interrupted dial tone.
2. Dial 9, then 2nd party’s telephone number.
3. After call is answered, press CONF Soft Key
Three-way conference is established. To add a 4
th
party, repeat process
If one party hangs up, other two remain connected.
Note: Max. 4 party conference, with 2 outside callers only.
Note: If in step 2. and you receive voicemail press * 4 times to cancel voicemail
then press transfer key to return to the original caller.
For Conferences greater than 2 outside callers there is a conference bridge that can
be scheduled along with the use of a conference telephone
Please contact the conferencing administrator to schedule the use of the Conference
Bridge.
To Set
1. Press SPEAKER key. Receive extension dial tone.
2. Press CALL FWD key, dial desired ext number or telephone number (including 9).
3. Press SPEAKER. Call forwarding for all calls is set. CALL FWD key is lit red.
To Cancel
1. Press SPEAKER key. Receive extension dial tone.
2. Press the Call FWD key
3. Press * (star)
4. Press SPEAKER. Call forwarding for all calls is cancelled. CALL FWD key is
unlit.
CONFERENCE—4 PARTY
CONFERENCE BRIDGE (IF APPLICABLE)
CALL FORWARDING - ALL CALLS