NEC SV9100 - Page 56

AudioCodes Mediant E-SBC 56 Document #: LTRT-12490
SV9100 IP-PBX & BroadCloud SIP Trunk
Action Subject
header.request-uri.methodtype
Action Type
Modify
Action Value
'480'
Figure 4-33: Configuring SIP Message Manipulation Rule 2 (for BroadCloud SIP Trunk)
5. Configure another manipulation rule (Manipulation Set 4) for BroadCloud SIP Trunk.
This rule is applied to forward messages sent to the BroadCloud SIP Trunk IP Group
with 00 prefix and the IP-PBX IP address in the CONTACT initiated by the IP-PBX.
This remove the 00.
Parameter Value
Index
3
Name
Call FW change Contact
Manipulation Set ID
4
Message Type
invite.response.302
Condition
header.Contact regex
(.*)(sip:00)(.*)(@)(192.168.100.10)(.*)
Action Subject
header.Contact
Action Type
Modify
Action Value
$1+'sip:'+$3+$4+'interop.adpt-tech.com'+$6